Blades for Schnell Rebar Mobile CGS 450
Blades for Rebar Mobile SCHNELL CGS 450
Mobile Blade – Size: 55 x 98 x 450 mm for Rebar Cutting
Engineered for SCHNELL rebar cutting machines, Model CGS 450.
The Mobile Blade (55 x 98 x 450 mm) manufactured by TFI Co. is the dynamic counterpart to the fixed bed blade, engineered to deliver the primary cutting impact in high-volume rebar shearing systems. Together, they form a complete, high-performance cutting set for the SCHNELL system.
Technical Specifications
- Blade Type: Mobile (Moving / Dynamic) Shear Blade
- Dimensions: 55 mm (Thickness) x 98 mm (Width) x 450 mm (Length)
- Application: Dynamic rebar shearing and impact cutting
- Machine Compatibility: SCHNELL Rebar Cutting & Shearing Machine
- Equipment Model: CGS 450 (typically utilized on heavy-duty mechanized cutting benches)
- Manufacturer: TFI Co.
Performance Profile & Differences from the Fixed Blade
While sharing identical dimensional parameters with the fixed blade, the mobile blade operates under distinct dynamic mechanical stresses:
- Shock Absorption: Moving in tandem with the hydraulic or mechanical ram, TFI Co. manufactures these knives using specialized high-alloy, shock-resistant tool steels engineered to withstand severe, repeated kinetic impacts without cracking.
- Precision Cutting Clearance: The precise 55 x 98 x 450 mm profile guarantees that the moving knife maintains an exacting stroke path against the static bed knife, producing clean, burr-free cuts across bundled rebar.
- Balanced Hardness: Advanced vacuum heat treatment provides an optimal balance between high surface hardness for wear resistance and deep core toughness to prevent edge chipping when shearing high-tensile rebar.
Installation & Operations for the Mobile Blade
- Shim Alignment: When installing the mobile blade onto the CGS 450 ram, use precision shims where necessary to ensure a perfectly parallel gap between the mobile and fixed blades across the entire 450 mm length.
- Seat Cleaning: Thoroughly clean the machine’s moving seat prior to mounting. Trapped mill scale or debris behind the 55 mm backing surface will lead to misalignment, uneven wear, or premature blade failure.
- Even Bolt Tensioning: Torque all mounting bolts incrementally and evenly to ensure the blade seats flat against the reciprocating ram arm.
Finalizing Your Requirements
To prepare your order or complete your inquiry, please confirm the following details:
- Do you require this mobile blade with countersunk holes, threaded holes, or a solid clamp-in design?
- Are you looking for a single replacement set (1 fixed + 1 mobile blade), or planning a bulk stock order for ongoing maintenance?
- Would you like technical recommendations on optimal blade clearances tailored to your specific rebar diameters?
For rebar fabricators running the SCHNELL CGS 450, this page supplies the exact mobile shear blade — 55 x 98 x 450 mm — manufactured by TFI Co. to match the dynamic cutting side of the machine’s shearing set, giving maintenance and procurement teams a direct, application-specific replacement rather than a generic stock blade. Reading through the specifications lets buyers confirm dimensional fit and cutting role before ordering, reducing downtime risk when pairing the mobile blade with its fixed bed counterpart for a complete high-volume rebar shearing setup. As a manufacturer of steel blades and machine knives since 1965, TFI Co. builds this component alongside its wider range of hsear blades, circular saw blades, bandsaw blades, and press brake tools supplied to industrial buyers across the UAE, Saudi Arabia, Oman, and the broader GCC market, where rebar cutting demands remain constant across construction and metalworking operations.
Need to Know
- Defines a mobile shear blade sized 55 x 98 x 450 mm built for SCHNELL CGS 450 rebar cutting machines.
- Delivers the primary dynamic cutting impact, pairing with a fixed bed blade to form a complete SCHNELL shearing set.
- Supports metal fabricators and maintenance teams needing precise rebar cutting components for high-volume production lines.
- Fits procurement schedules for factories replacing worn dynamic shear blades on SCHNELL CGS 450 systems.
- Reflects TFI Co.’s expertise as a steel blade and machine knife manufacturer since 1965 serving UAE and GCC industrial buyers.
Engineering Data
| Product Type | Mobile (moving/dynamic) shear blade for rebar cutting machines |
|---|---|
| Material | High-grade tool steel, heat-treated for impact resistance and edge retention |
| Dimensions | 55 x 98 x 450 mm |
| Blade Function | Delivers primary cutting impact against fixed bed blade in shear assembly |
| Compatible Machine | SCHNELL Rebar Mobile CGS 450 |
| Complementary Component | Paired with fixed bed blade to form complete cutting set |
| Application | Rebar cutting in high-volume metalworking and construction steel processing |
| Typical Bar Capacity | Rebar diameters up to approx. 36-45 mm, per CGS-series shear duty range |
| Industry Segment | Industrial cutting tools for rebar fabrication and construction steel lines |
| Target Markets | UAE, Saudi Arabia, Oman, GCC, and wider Middle East industrial buyers |
| Manufacturer | TFI Co., manufacturer of steel blades and machine knives since 1965 |
| Order Configuration | Specify on order |
| Installation Fit | Direct replacement fit for CGS 450 mobile blade position, no modification required |
| Product Category | Rebar cutting blades within TFI Co. machine knives and shear blades range |
Applications
- Rebar Fabrication Yards: Supplies the mobile shear blade (55 x 98 x 450 mm) for SCHNELL CGS 450 machines used in high-volume rebar cutting lines at precast and construction fabrication yards.
- Maintenance Teams: Enables maintenance teams operating SCHNELL rebar cutting equipment to replace the dynamic shear blade alongside the fixed bed blade as a matched cutting set, reducing machine downtime.
- Construction Steel Processors, GCC: Fits rebar processing oprations across UAE, Saudi Arabia, Oman, and the wider GCC that run SCHNELL CGS 450 mobile cutting units on active construction projects.
- Industrial Procurement Teams: Gives industrial procurement teams a direct source for SCHNELL-specification mobile shear blades, avoiding delays from waiting on original equipment import channels.
- Production Managers: Supports production managers scheduling continuous rebar shearing runs where blade wear on the moving shear directly affects daily cutting output.
- Precast Concrete Plants: Applies to precast concrete plants that integrate SCHNELL rebar cutting machines into automated reinforcement cage production lines.
- Metal Fabricators, Middle East: Serves metal fabricators across the Middle East sourcing rebar cutting blades as part of TFI Co.’s wider range of shear blades manufactured since 1965.
- Equipment Retrofitting: Covers retrofit and blade-set replacement scenarios where the CGS 450 mobile blade must be paired with the fixed bed blade to restore full shearing performance.
Expert Answers
What is the exact size of the Mobile Blade for the Schnell CGS 450?
The Mobile Blade for the SCHNELL Rebar Mobile CGS 450 measures 55 x 98 x 450 mm. This dynamic shear blade is manufactured by TFI Co. to precise dimensional tolerances required for reliable rebar cutting performance in this specific machine model.
What is the difference between the Mobile Blade and the Fixed Bed Blade in this cutting set?
The Mobile Blade is the moving (dynamic) component of the shear system, delivering the primary cutting impact during operation. It works in conjunction with a fixed bed blade, which remains stationary to provide the counter-surface. Together, both blades form the complete high-performance cutting set required for the SCHNELL CGS 450 system.
Which machine model is this Mobile Blade compatible with?
This Mobile Blade (55 x 98 x 450 mm) is specifically engineered for SCHNELL rebar cutting machines, Model CGS 450. TFI Co. manufactures this blade to match the exact operational requirements and shearing dynamics of this machine model.
What type of cutting application is this blade designed for?
This is a Mobile (Moving / Dynamic) Shear blade designed for high-volume rebar cutting operations. It is built to withstand repeated shearing cycles typical in industrial rebar processing lines where consistent cutting impact and durability are essential.
Why choose TFI Co. for Schnell CGS 450 replacement blades?
TFI Co. has manufactured steel blades and machine knives since 1965, supplying industrial buyers across the UAE and GCC regon. Our Mobile Blade for the SCHNELL CGS 450 is engineered to match OEM specifications, ensuring reliable fit and cutting performance as a replacement or spare part for high-volume rebar shearing systems.
How can I order this Mobile Blade for my Schnell CGS 450 machine?
To order the 55 x 98 x 450 mm Mobile Blade for your SCHNELL Rebar Mobile CGS 450, use the live chat on this page for immediate assistance, submit the inquiry form with your machine and quantity details, or call TFI Co. directly to confirm specifications and place your order.
Accuracy and fit commitments for this Schnell CGS 450 mobile blade page:
- We manufacture the mobile shear blade to the exact 55 x 98 x 450 mm dimension required for the SCHNELL CGS 450 dynamic sheairng side.
- Dimensional tolerances are held to match precise rebar cutting performance in this specific machine model, not a generic blade size.
- This blade is supplied to pair with a fixed bed blade; actual cutting results depend on correct installation, pairing, and machine condition.
- Application guidance reflects typical use in precast and construction rebar cutting lines, which can vary by site setup and machine wear.
TFI Co. — Manufacturer of Steel Blades Since 1965.