Ordering Shear Blade Sharpening in UAE
Step 1: Checking Dimensions
Check the dimensions of your knives and make a note of them.
Step 2: Contacting TFI Co.
Contact TFI Co. and provide the sizes of the shear blades you measured in step 1.
Step 3: Receiving a Quote
Receive a quote in less than 24 hours and arrange for your blades to be collected in less than 2 working days after they are opened.
Additional Services
We also offer opening and installation of shear blades. If you require knife installation, please mention it in your enquiry.
Enquiry of Prices
For enquiry of prices kindly fill out our online contact us form or please use the instant chat button at corner of this page.
We are online!
Thanks
TFI CO
TFI Co. provides expert sharpening of shearing machine knives for metal working operations in Abu Dhabi, UAE, restoring dull blades to precise factory specifications for sheet metal fabricators and manufacturers. As the region’s trusted industrial blade maker since 1965, we solve the costly problems of burr formation, inaccurate cuts, excessive material waste, and unplanned downtime that occur when shearing knives lose their edge during high-volume production. Our controlled grinding and honing process removes the minimum material necessary while returning a consistent bevel angle, delivering the measurable advantage of up to four additional sharpening cycles per blade set and maintaining cut tolerances within 0.1 mm across stainless steel, aluminum, and carbon plate. With more than 12,000 blade profiles manufactured for customers in over 50 countries, we inspect, sharpen, and balance every knife to ensure immediate performance upon return, helping UAE workshops lower tooling expenses and sustain continuous, high-quality output without frequent new blade purchases.
At a Glance
- Sharpening restores shearing machine knives to optimal cutting performance for metal working industries in UAE.
- Technicians verify knife dimensions prior to performing precision sharpening on all received blades.
- Blade reconditioning preserves structural integrity showing no major damages after industrial use.
- Customers contact specialists to initiate efficient sharpening processes for their shearing machine knives.
- Expertise accumulated since 1965 enables supply of sharpening services to over 50 countries.
Verified Quality
ISO 9001:2015 certified for quality management in industrial blade manufacturing and precision sharpening services
Trusted by metal fabricators across the UAE for reliable shearing machine knife sharpening with consistent performance since 1965
Warranty: All sharpening services include our re-grind warranty with free replacement if the blade does not perform to original specifications after service.
Technical Parameters
| Material Grade | DIN 1.2379 Tool Steel per DIN 17350 |
|---|---|
| Hardness | 56~60 HRC per ISO 6508 |
| Dimensions | 3100 mm length x 125 mm width x 35 mm thickness |
| Tolerance | ±0.05 mm edge parallelism |
| Edge Geometry | Primary rake 1.75 degrees with micro honed land |
| Surface Finish | Ra 0.4 μm ground finish per TFI Co. production standard |
| Compatible Machines | Durma, Ermaksan, Baykal, LVD, Adira |
| Operating Conditions | Ambient temperature shearing of mild steel and stainless sheets |
| Maximum Sheet Thickness | 12 mm carbon steel |
| Regrind Allowance | 3 mm per edge |
Field Use Cases
- Sheet Metal Fabrication: Resharpening shear blades for hydraulic guillotine shearing machines cutting 3-8mm mild steel and stainless sheets at 10-18 strokes per minute in Abu Dhabi fabrication shops.
- Metal Recycling: Maintenance of heavy-duty guillotine shear knives processing scrap steel and aluminum at 8-20 tonnes per hour in UAE recycling facilities.
- Oil and Gas: Sharpening shearing machine knives for cutting carbon steel and stainless plates up to 40mm thick during fabrication of pressure vessels and rig components in Abu Dhabi’s energy sector.
- Aluminum Fabrication: Precision re-edging of shear blades used on cut-to-length lines processing aluminum coils into sheets for architectural cladding and panels, a dominant industry in the UAE.
- Shipbuilding and Marine: Reconditioning blades for plate shearing machines handling AH36 shipbuilding steel up to 25mm thick in UAE shipyards and marine repair facilities.
- Structural Steel Construction: Blade sharpening for hydraulic shears cutting structural steel plates and beams for high-rise and infrastructure projects across Abu Dhabi and the UAE.
- Automotive Component Manufacturing: Sharpening shear knives for high-speed blanking lines processing 1.5-3mm high-strength automotive steel sheets at linear speeds of 30 meters per minute.
- HVAC Duct Manufacturing: Restoring edges on shearing machine knives used to cut galvanized steel coils into precise ducting blanks on mechanical shears operating at 15 cuts per minute.
Frequently Asked Questions
How do I order sharpening for shearing machine knives used in metal working in Abu Dhabi?
Check the dimensions of your knives and make a note of them. Then contact TFI Co. and provide the sizes of the shear blades you need re-sharpened to restore cutting performance.
What preparation is required before contacting TFI Co. for shear blade sharpening in the UAE?
Accurately measure and rcord the dimensions of your existing shear blades. This ensures the re-sharpening matches your specific metal working machinery requirements.
Can old shear blades with no major damage be re-sharpened for continued industrial use?
Yes. Old sets of shear blades showing no major damages from Abu Dhabi clients are regularly accepted and re-sharpened by TFI Co. for metal working applications.
What does the TFI Co. re-sharpening process deliver for shearing machine knives?
The service restores edge geometry and cutting precision on used shear blades, enabling reliable performance in metal fabrication as demonstrated with delivered sets to Abu Dhabi clients.
Why choose TFI Co. for professional sharpening of industrial machine knives in the GCC?
TFI Co. specializes in manufacturing and sharpening steel blades and machine knives, delivering technical re-sharpening tailored to regional industrial standards for shear blades and related tooling.
What is the next step to arrange sharpening of my shearing machine knives with TFI Co. in Abu Dhabi?
Check the dimensions of your knves and note them as outlined in the ordering process, then start a chat with us to provide those sizes and move forward with your specific sharpening requirement.
TFI Co. certifies every blade meets the specifications above — correct hardness, geometry, and material grade, verified under ISO 9001:2015 before shipment. Achieving the stated performance figures also requires correct installation, operation within rated parameters, and scheduled maintenance. Contact our technical team to validate blade selection for your specific application.
Expert resharpening by TFI Co. restores dull shearing machine knives to precise factory specifications for metal fabricators in Abu Dhabi, solving costly performance problems.
- Precision CNC grinding maintains tolerances within 0.02mm for straight sharp edges
- Polished mirror finish delivers clean cuts and significantly prolongs blade life
- Proven on hydraulic guillotine shears cutting 3-8mm steel at 10-18 strokes per minute
- Handles heavy duty scrap processing at 8-20 tonnes per hour in UAE recycling
From your local ISO 9001:2015 certified blade manufacturer, trusted in the region since 1965.