Ø140x70x3mm 60° Dish Slitter Knives
Ø140x70x3mm 60° Dish Slitter Knives – Heavy-Duty Slitting Performance for Demanding Applications
The Ø140x70x3mm 60° Dish Slitter Knife is designed for industrial slitting operations where blade rigidity, dimensional stability, and long-term cutting performance are critical. Featuring a larger diameter and increased thickness compared to standard slitting knives, this specification is particularly suitable for heavy-duty converting and continuous production environments.
Engineered to deliver clean cuts, reduced burr formation, and extended service life, the Ø140x70x3mm 60° configuration is widely used in industries that demand reliable performance under high production loads.
Why Choose Ø140x70x3mm 60° Dish Slitter Knives?
The performance of a slitter knife is determined by the balance between diameter, bore size, thickness, and cutting geometry.
The Ø140 mm outer diameter provides excellent rotational stability, allowing the blade to maintain consistent cutting quality even at high operating speeds.
The Ø70 mm bore ensures secure mounting and compatibility with a wide range of industrial knife holders and slitting systems.
With a thickness of 3 mm, the blade offers superior rigidity and resistance to deflection, making it ideal for tougher materials and demanding production conditions.
The 60° bevel angle provides an optimal combination of edge durability and cutting efficiency, helping manufacturers achieve precise cuts while minimizing wear.
Built for Heavy-Duty Industrial Operations
The Ø140x70x3mm 60° dish slitter knife is commonly used in:
- Flexible packaging production
- Plastic film converting
- Foil slitting operations
- Laminated material processing
- Paper and paperboard converting
- Nonwoven materials
- Textile manufacturing
- Industrial tape production
- Heavy-duty roll slitting lines
Its robust construction makes it especially suitable for operations requiring long production runs and consistent cutting accuracy.
Precision Manufacturing by TFI Co.
At TFI Co., every slitter knife is manufactured according to strict quality standards to ensure optimal cutting performance and reliability.
Key manufacturing factors include:
- Premium tool steel selection
- Controlled heat treatment
- Precision grinding
- Flatness control
- Surface finish optimization
- Side run-out accuracy
- Edge geometry consistency
Every blade is carefully inspected to ensure it meets the requirements of industrial slitting applications.
Heat Treatment for Maximum Durability
Heat treatment plays a crucial role in determining the overall performance of a slitter knife.
TFI Co. utilizes controlled heat treatment processes that provide:
- Increased wear resistance
- Enhanced edge retention
- Improved dimensional stability
- Longer service life
- Reduced sharpening frequency
This allows the blade to maintain cutting precision throughout extended production cycles.
Superior Edge Quality and Cutting Accuracy
The cutting edge of the Ø140x70x3mm 60° dish slitter knife is produced using advanced grinding and finishing techniques.
These processes help achieve:
- Clean and precise cuts
- Reduced burr formation
- Lower cutting resistance
- Improved material flow
- Consistent slit width accuracy
The result is improved production efficiency and reduced material waste.
Compatible with Leading Industrial Machinery
TFI Co. manufactures slitter knives suitable for a wide variety of converting, packaging, and processing machines, including:
- Multivac®
- ULMA®
- SEALPAC®
- Weber®
- Marel®
- GEA®
- Ishida®
- Bosch®
- Syntegon®
- Fuji®
- Hayssen®
- Rovema®
- Ilapak®
- Cryovac®
- Tetra Pak®
- Variovac®
- Reepack®
- VC999®
and many other industrial systems worldwide.
Reliable Slitting Solutions from TFI Co.
For manufacturers seeking a robust and dependable slitting solution, the Ø140x70x3mm 60° Dish Slitter Knife delivers the strength, precision, and durability required for modern production environments.
Combining advanced metallurgy, precision manufacturing, and strict quality control, TFI Co. continues to provide industrial cutting solutions trusted by customers across the UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Iraq, Belarus, Russia, and international markets.
TFI Co. manufactures and supplies the Ø140x70x3mm 60° Dish Slitter Knives as part of its range of industrial steel blades and machine knives, delivering the rigidity, dimensional stability, and long-term cutting performance required by metal fabricators and production managers across the UAE, GCC, and wider regional markets. This page details the engineering advantages of the larger diameter and increased thickness compared to standard slitter knives, enabling readers to evaluate suitability for heavy-duty converting lines, specify blades that produce clean cuts with reduced burr formation, and extend service intervals in continuous operations. As a manufacturer of steel blades since 1965, TFI Co. grounds these specifications in decades of proven industrial application data.
Key Takeaways
- Dish slitter knives deliver rigidity and dimensional stability in heavy-duty slitting operations.
- Manufacturers supply steel blades to industrial buyers across UAE and GCC markets.
- Production managers select dish slitter knives for extended service life and clean cuts.
- Metal fabricators deploy slitter knives during continuous production in converting environments.
- Companies manufacture industrial machine knives since 1965 for Middle East metalworking applications.
Quality & Certifications
Customised confirmation of material standards and manufacturing specifications for our steel blades is available on request.
Used by metal fabricators, factory buyers, maintenance teams, production managers, and industrial procurement teams across the GCC. Trusted for heavy-duty slitting performance in demanding industrial environments. Manufacturer of Steel Blades Since 1965.
Warranty: Comprehensive manufacturer support with replacement for defects and regrind services is provided for all industrial steel blades and machine knives.
Engineering Data
| Product Type | Dsh Slitter Knife |
|---|---|
| Size | Ø140x70x3 mm |
| Dish Angle | 60° |
| Application | Heavy-duty industrial slitting operations |
| Design Features | Blade rigidity, dimensional stability, long-term cutting performance |
| Performance | Clean cuts, reduced burr formation, extended service life |
| Suitable For | Heavy-duty converting and continuous production environments |
| Category | Industrial steel blades, machine knives |
| Compatible With | Metalworking applications in UAE and GCC |
| Target Regions | UAE, Saudi Arabia, Oman, Middle East |
| Manufacturer | TFI Co. Snce 1965 |
| Product Line | Industrial knives for metalworking |
Industry Applications
- Heavy-Duty Slitting: Industrial slitting operations in continuous production environments where the Ø140x70x3mm 60° dish design delivers blade rigidity, dimensional stability, and reduced burr formation.
- Metal Fabricators: Metal fabricators processing thick coils rely on these machine knives for clean cuts and extended service life in high-volume metalworking lines.
- UAE Production Managers: Production managers in UAE metalworking facilities use these slitter knives to maintain consistent performance during demanding converting applications.
- Continuous Converting: Heavy-duty converting setups requiring long-term cutting performance from industrial knives with increased thickness for stability under load.
- GCC Maintenance Teams: Maintenance teams in GCC factories select these dish slitter knives to minimize downtime through reliable dimensional stability and durability.
- Industrial Procurement: Industrial procurement teams sourcing precision steel blades since 1965 for slitting operations across regional manufacturing sites.
- Precision Slitting: Precision slitting of heavy-gauge materials in metal service centers where the 60° configuration ensures clean edges and reduced edge deformation.
- Saudi Arabian Fabricators: Factory buyers and production managers in Saudi Arabian metal fabrication plants apply these knives in continuous high-rigidity slitting workflows.
Frequently Asked Questions
What are Ø140x70x3mm 60° Dish Slitter Knives?
Ø140x70x3mm 60° Dish Slitter Knives are heavy-duty industrial blades manufactured by TFI Co. since 1965. Featuring a larger diameter and 3mm thickness compared to standard slitting knives, tey deliver exceptional rigidity and dimensional stability. Engineered for demanding slitting operations, these knives provide clean cuts, reduced burr formation, and extended service life in continuous production and heavy-duty converting environments.
How do Ø140x70x3mm 60° Dish Slitter Knives improve slitting performance?
The Ø140x70x3mm 60° Dish Slitter Knives improve performance through superior blade rigidity and dimensional stability from their increased diameter and thickness. Manufactured by TFI Co. since 1965, they minimize deflection in high-speed operations, resulting in cleaner edges, significantly reduced burr formation, and longer intervals between replacements in heavy-duty converting and continuous industrial slitting lines.
Can the Ø140x70x3mm 60° Dish Slitter Knives support continuous production?
Yes, the Ø140x70x3mm 60° Dish Slitter Knives are designed specifically for cntinuous production environments and heavy-duty converting. Their robust configuration ensures the blade rigidity and dimensional stability required for uninterrupted industrial slitting. TFI Co., manufacturer of steel blades since 1965, engineers these knives to maintain precision, reduce downtime, and deliver consistent results in demanding GCC applications.
Does the 60° dish angle enhance cutting results?
The 60° dish angle optimizes cutting geometry on the Ø140x70x3mm Dish Slitter Knives, promoting clean material separation with minimal burr formation. Produced by TFI Co. since 1965, this angle improves edge quality and material flow while enhancing blade stability during heavy-duty slitting. It directly contributes to extended service life and superior performance in high-volume industrial operations.
Which features distinguish these from standard slitter knives?
The Ø140x70x3mm 60° Dish Slitter Knives feature a larger diameter and increased 3mm thickness compared to standard designs, delivering greater rigidity and dimensional stability. Manufactured by TFI Co. since 1965, they are optimized for heavy-duty converting with clean cuts, reduced burrs, and extended service life, making them the preferred choice for continuous production environments across the UAE and GCC.
How can I obtain the Ø140x70x3mm 60° Dish Slitter Knives for heavy-duty slitting in the GCC?
To proceed with the Ø140x70x3mm 60° Dish Slitter Knives for your heavy-duty industrial slitting applications, contact TFI Co., manufacturer of steel blades since 1965. The fastest option is Chat for immediate specification guidance. Alternatively, submit an Online Form detailing your dimensions and requirements or Call our team for tailored support across the GCC region.
TFI Co. certifies every blade meets the specifications above — correct hardness, geometry, and material grade, verified under ISO 9001:2015 before shipment. Achieving the stated performance figures also requires correct installation, operation within rated parameters, and scheduled maintenance. Contact our technical team to validate blade selection for your specific application.
TFI Co. commits to manufacturing and supplying industrial steel blades and machine knives with the rigidity, dimensional stability and long-term cutting performance required by industrial buyers in the UAE, GCC and wider regional markets.
- Delivering superior blade rigidity and dimensional stability from increased diameter and thickness in these heavy-duty dish slitter knives since 1965.
- Achieving clean cuts, reduced burr formation and extended service life in continuous production and high-volume converting applications.
- Performance outcomes may vary depending on context, specific use and individual configuration parameters.
Since 1965. Manufacturre of Steel Blades Since 1965. Bound to the English language.